87 982 Miles
Crossley & Webb Project & Drivers:
This is an opportunity to secure the car you’ve always wanted at a fair price and carry out the refurbishment at your pace and budget. Technical inspections are carried out and a report on the car’s condition is compiled. These cars are sold “as-is” in their current condition but our expert advice and technical report is included in the purchase price.
This 1970 Mercedes Benz 280SL is a “Project car”. By definition, it’s a car that needs refurbishment in more than a few areas and requires the owner to plan the refurbishment into a structured process or project.
- 87 982 Miles showing.
- White with black interior.
- Manual gearbox.
- Technical report included.
The Mercedes-Benz W 113 is a two-seat roadster/coupé, introduced at the 1963 Geneva Motor Show, and produced from 1963 through 1971. It replaced both the legendary 300 SL (W 198) and the 190 SL (W 121 BII).
The W 113 SL was developed under the auspices of Mercedes-Benz Technical Director Fritz Nallinger, Chief Engineer Rudolf Uhlenhaut and Head of Styling Friedrich Geiger. The lead designers were Paul Bracq and Béla Barényi, who created its distinctive, patented, slightly concave hardtop, which inspired the “Pagoda” nickname.
All models were equipped with an inline-six cylinder engine with multi-port fuel injection. The bonnet, trunk lid, door skins and tonneau cover were made of aluminum to reduce weight. The comparatively short and wide chassis, combined with an excellent suspension, powerful brakes and radial tires gave the W 113 superb handling for its time. The styling of the front, with its characteristic upright Bosch “fishbowl” headlights and simple chrome grille, dominated by the large three-pointed star in the nose panel, paid homage to the then already legendary 300 SL roadster.
The 280 SL was introduced in December 1967 and continued in production through 23 February 1971, when the W 113 was replaced by its successor, the entirely new and substantially heavier R107 350 SL. Over the years, the W 113 evolved from a sports car into a comfortable grand tourer. Manual transmission models came with the standard 4-speed or the optional ZF 5-speed, which was ordered only 882 times and thus is a highly sought-after original option today. In Europe, manual transmissions without air conditioning were still the predominant choice.
The main change was an upgrade to the 2,778 cc (2.8 L) M130 engine with 170 PS (130 kW; 170 hp) maximum power and 180 lb⋅ft (244 N⋅m) maximum torque, which finally gave the W 113 adequate power. The performance improvement was achieved by increasing bore by 4.5 mm (0.2 in), which stretched the limits of the M180 block, and required pairwise cylinder casts without cooling water passages. This mandated an oil-cooler, which was fitted vertically next to the radiator. Each engine was now bench-tested for two hours prior to being fitted, so their power specification was guaranteed at last.
Enquire for more